Blog

Ⅰ. The molded parts of automobile injection molds have various materialsMolded parts can be clearly seen in automobile injection molds. These molded parts will have various materials, such as differe...

I. What is chromatic aberration? Chromatic aberration literally refers to the difference in color that is visible to the observer. It's quick, cheap and easy to measure chromatic aberration with n...

I. What are injection moulding products? Generally speaking, injection moulding products refer to the injection molded products made by the following process: heat, plasticize and melt the plastic by ...

The density of magnesium alloy is less than 2g/cm3, and it is the lightest metal structural material at present. Its specific strength is higher than that of aluminum alloy and steel, but slightly low...

1. Remove Impurities to Improve Corrosion Resistance and Strengthen the Improvement(1) Improving the Purity of Magnesium Alloy in Magnesium CastingsGenerally, high purity magnesium alloy has better co...

Magnesium and magnesium alloy are the lightest structural metals with low density of only 1.74g/cm3. They are easy to be machined because of the good machinability, especially when the amount of the m...

Ⅰ. Gas-assisted injection moulding product designGas-assisted injection molding technology is an emerging plastic injection molding technology. Its principle is to use high-pressure gas to produce a ...

1. What is multi-stage injection molding?Modern injection moulding products have been widely used in various fields. The shapes of the products are very complex, and the properties of the polymers use...